Canadian Journal of Chemical Engineering General Chemical Engineering

Physics‐informed surrogate modelling for intermittent wheat drying: Fractional kinetics, Arrhenius generalization, and cross‐condition prediction

Gustavo de Souza Matias, Luiz Mario de Matos Jorge, Emerson Barrios Mogollón, Luís Fernando Roveda, Everton Luiz Vieira, Thiago Vinícius Barros, Valderice Herth Junkes, Ana Caroline Raimundini Aranha
Wiley · 2026-11-18 · DOI 10.1002/cjce.70645

Abstract

Abstract Intermittent grain drying induces non‐Markovian, sub‐diffusive moisture transport that classical Fickian and curve‐by‐curve empirical models cannot intrinsically generalize. This work establishes a unified k ( T , I ) structural requirement, k ( T , I ) = k 0 exp.(− E ₐ/RT)· I ᵝ, that simultaneously governs empirical thin‐layer models, the fractional Mittag‐Leffler parametric model, and a fractional physics‐informed machine learning (fPIML) framework. Experiments on BRS‐Jacana wheat at three temperatures (40, 55, and 70°C) and two intermittency periods (5 and 10 min) yielded 152 gravimetric observations on eight drying curves. Two‐stage globalization of six empirical benchmarks confirmed Arrhenius activation energies of 22–42 kJ mol −1 ( R 2 ≥ 0.91) for the physically well‐behaved models (Page, Logarithmic, Midilli), while the fractional‐parametric model yielded E ₐ = 33.9 kJ mol −1 and a global law α ( T , I ) ≈ −1.28 + 803.4/Tᵅ − 0.246·ln(I) ( R 2 = 0.844). The fPIML embeds the Caputo fractional governing equation Dₜᵅ(MR) + λ ᵅ( T , I )·MR = 0 into the training loss, with λ ᵅ structured as a learned Arrhenius expression. Under thermal leave‐one‐temperature‐out validation, the fPIML (RMSE = 0.0479, R 2 = 0.955) achieves lower RMSE and higher explained variance than both the integer‐order PINN (RMSE = 0.0604, R 2 = 0.929) and the data‐only ANN (RMSE = 0.0795, R 2 = 0.875). Under the critical intermittency extrapolation test, trained exclusively on I = 5 min and tested on I = 10 min, the fPIML achieves the lowest MAE (0.059) among all models; the integer‐order PINN reaches R 2 = 0.504 but with an MAE 90% higher (0.112), while the data‐only ANN collapses to R 2 = −0.025.

Read at publisher →