Efficient Ozone Synthesis of Dielectric Barrier Discharge Packed with Metal Beads

Clinical and Translational Immunology · Wiley · 2026-08-27 · DOI: 10.1007/s11090-026-10704-1

Аннотация

The packed dielectric barrier discharge (DBD) reactors were constructed by packing one layer of metal beads (zinc, aluminum, copper, etc.) into the discharge gap and their performances in ozone synthesis were studied here. Relative to packing the conventional dielectric beads (such as silicate glass and Al 2 O 3 ) and no packing, packing metal beads makes DBD exhibit much intenser and denser microdischarges, as well as higher electron excitation temperature ( T exc ), electron density ( n e ) and atomic oxygen density ([ O ]), thus greatly promoting ozone synthesis reactions. Due to the easier electron emission from the surfaces of metals with lower electron work functions, packing metal beads of zinc and copper which respectively possess the lowest and highest work functions among all the applied metals leads to the acquisition of the highest and lowest T exc , n e , [ O ] and ozone synthesis performance, respectively. At energy density of 306–1968 J/L, ozone concentration, energy yield and production obtained by packing zinc beads are 26.7–60.5 g/Nm 3 , 314.2–111.3 g/kWh and 0.16–0.36 g/h, respectively, all about 2–3 times higher than packing silicate glass beads (8.8–27.1 g/Nm 3 , 103.5–49.5 g/kWh and 0.05–0.16 g/h) and about 4–9 times higher than no packing (3.0–14.7 g/Nm 3 , 35.3–26.9 g/kWh and 0.02–0.09 g/h).

Читать у издателя →

Похожие статьи