A comparison of the characteristics of crude rubber, vulcanisation behaviour, and properties of vulcanised rubber from natural rubber sheets of different origins
Аннотация
The origin of rubber has a significant impact on its properties. Indonesia is one of the traditional producing regions for smoked sheet rubber. This study compared the performance differences between Chinese Yun rubber (products from Jingyang and Jiangcheng companies) and Indonesian RSS No. 1 smoked sheet rubber to assess their potential suitability for use in high-end rubber products. The research shows that the nitrogen content (0.56%) and volatile matter content (0.53%) of Indonesian smoked sheet rubber exceed the processing standards for aviation rubber (nitrogen 0.20–0.50%, volatile matter ≤ 0.5%), which may cause processing defects. In contrast, the chemical composition of domestic smoked sheet rubber fully meets the standards, with Jingyang smoked sheet rubber demonstrating the best overall performance, including a plasticity retention index (PRI = 87%), elongation at break (787%), and wet strength (0.8 MPa), all significantly superior to Indonesian smoked sheet rubber. In terms of vulcanisation performance, Jingyang smoked sheet rubber has a wider processing safety window (Ts1 = 2.65 min), while Jiangcheng smoked sheet rubber has a higher crosslink density (MH = 0.83 N·m), though early vulcanisation risks need to be prevented. In the mechanical testing of vulcanised rubber, Jiangcheng smoked sheet rubber has the highest tensile strength (26.2 MPa) and hardness (44–45°), while Jingyang smoked sheet rubber has a flexibility (elongation 764%), most similar to that of Indonesian smoked sheet rubber. Dynamic mechanical analysis (DMA) confirmed that there were no significant differences in the crosslink network density (0.45–0.5) and energy dissipation behaviour after vulcanisation among the three types of rubber. Jingyang rubber combines processing stability with balanced performance, making it well-suited for use in high-end applications.