Engineering Reports General Engineering

Torque Ripple Reduction in Direct Torque Control PMSM Using Fuzzy Adaptive Integral Sliding Mode Control

Hao Qiu, Weilin Wang, Hongfan Lu, Saif Talal Bahar
Wiley · 2026-11-01 · DOI 10.1002/eng2.71166

Abstract

ABSTRACT To address the issues of poor robustness and significant torque/current fluctuations in permanent magnet synchronous motors (PMSMs) under traditional direct torque control (DTC), a fuzzy adaptive integral sliding mode control (FASMC) strategy based on a novel reaching law is proposed. An integral sliding surface is designed to eliminate the differential term of speed error, thereby suppressing noise amplification. A hybrid reaching law combining exponential and power terms is introduced, and a saturation function is employed to replace the sign function for chattering reduction. Furthermore, fuzzy logic is utilized to adaptively tune the reaching law parameters ( and ) online according to speed error and its change rate, enhancing the antidisturbance capability. An improved seven‐vector switching table with zero‐vector insertion is also derived to reduce the average switching frequency. Comparative simulations among PI‐DTC, conventional SMC‐DTC, and the proposed FASMC‐DTC are conducted in MATLAB/Simulink with a control period of 50 μs. Results demonstrate that the FASMC strategy achieves a torque ripple of merely 0.60% (vs. 4.21% for PI), reduces the total harmonic distortion (THD) of stator current from 9.43% to 3.67%, and decreases the inverter switching frequency by 28.3% compared with conventional SMC. The torque tracking error is constrained within ±0.04 N·m under sudden load disturbances, demonstrating the superior dynamic performance and robustness of the proposed method in simulation.

Read at publisher →