Combustion-Driven Formation of Fe–Ni Magnetic Materials
Аннотация
Abstract Achieving bulk nanocrystalline Fe–Ni-based alloys with controlled microstructure and magnetic performance still remains a major challenge. Here, we demonstrate a rapid, energy-efficient route to fabricate Fe 4 Al 4 Ni 8 B γ alloys via self-propagating high-temperature synthesis (SHS) approach guided by compositional design and thermal analysis. High-speed temperature scanning (HSTS) revealed the formation of Fe–Al–Ni–B alloy at ~1070°C, with no phase transformation occurring up to 1700°C. Guided by the results of HSTS modeling experiments, the synthesis of the bulk Fe–Ni–Al–B alloy was successfully performed in a controlled combustion mode. Substitutional aluminum and interstitial boron enabled controlled phase evolution and microstructural refinement during ultrafast, liquid-phase-assisted reactions. Higher aluminum content was found to enhance the system reactivity, thereby promoting the formation of a more homogeneous product. Magnetic measurements showed soft magnetic behavior with low coercivity and saturation magnetization of ~30 emu/g, consistent with values reported for similar systems, and tunable via boron content. Notably, interstitial boron stabilized ordered phases within the Fe–Ni–Al lattice without forming hard borides, enhancing magnetic softness.