Process simulation and analysis of pressure equalization and reflux in flue gas CO 2 capture via vacuum pressure swing adsorption

Ionics · Springer Nature · 2026-09-16 · DOI: 10.1007/s10450-026-00708-w

Аннотация

While vacuum pressure swing adsorption (VPSA) is a well-established separation technology for carbon capture from flue gas, it retains significant potential for process optimization. In this study, we propose and evaluate an enhanced VPSA cycle using Zeolite 13X, operating between a pressure range of 0.05–1.15 bar, to improve the separation performance. A multi-bed VPSA simulation model was established, with its constitutive equations verified against experimental breakthrough results for a simulated flue gas (15%CO 2 /85%N 2 ). Various process configurations were demonstrated and compared, followed by a parametric analysis to optimize the separation efficiency. We compared traditional reflux VPSA (TR-VPSA), in which reflux gas enters the bed during a separate step, with joint-reflux VPSA (JR-VPSA), in which reflux enters the feed gas stream. The two configurations achieved comparable CO 2 purity and recovery, indicating that separation performance is relatively insensitive to the timing of reflux introduction. However, the process performance is highly sensitive to the reflux ratio (ratio of reflux flow to feed flow) and pressure equalization (PE) parameters. Increasing the reflux ratio from 0 to 70% enhanced the CO 2 purity from 35.80% to 66.02%, albeit with a moderate decrease in recovery from 97.40% to 91.55%. With pressure equalization time extending from 0 to 30 s, the recovery decreased by 1.28%, the purity increased by 7.09%, and the energy consumption decreased by 22.2 kJ/kgCO 2 . However, all performance indicators stabilized when the pressure equalization time exceeds 30s. At a fixed PE time of 20 s, we further compared five PE configurations: top-to-top, bottom-to-bottom, concurrent top-to-top and bottom-to-bottom, top-to-bottom cascade, and bottom-to-top reverse cascade. The cascade equalization strategy achieved the highest purity and lowest energy consumption, whereas the “top-to-top” configuration maximized the recovery. This work offers valuable guidance for designing efficient PSA cycles in carbon capture applications.

Читать у издателя →

Похожие статьи