Rapid Cataluminescence Sensing of Acetonitrile Using Urchin‐Like Hierarchical CuCo2O4 Spinel

Bai Sun, Junjie Wang, Jingjie Fan, Guiyun Hong, Yun Wang, Mingjian Yi, Hao Huang, Lining Bao, Shuguang Zhu, Hongyan Wang
Luminescence · Wiley · 2026-11-05 · DOI: 10.1002/bio.70672

Аннотация

ABSTRACT Acetonitrile (CH 3 CN) is widely used in pharmaceutical and fine‐chemical industries and may be released during solvent handling, exhaust‐gas treatment, and wastewater‐treatment‐related processes, posing potential environmental and occupational health risks. However, its relatively low chemical reactivity makes rapid detection challenging. In this work, an urchin‐like hierarchical CuCo 2 O 4 spinel oxide was developed as a cataluminescence (CTL) sensing material for rapid acetonitrile detection. The material was synthesized by a facile hydrothermal method and characterized by SEM, HRTEM, BET, XRD, FT‐IR, and XPS. The results reveal a three‐dimensional hierarchical architecture with mesoporous characteristics, a stable spinel framework, and oxygen‐related surface species. Under optimized conditions of 194°C and 350 mL min −1 , the sensor exhibited a linear response over 7.3–730 ppm, with R 2 = 0.9834 and a detection limit of 1.21 ppm (S/ N = 3). The response and recovery times were 3 and 37 s, respectively, with good repeatability (RSD = 3.02%). The enhanced CTL performance is attributed to the hierarchical structure and oxygen‐related surface chemistry, which facilitate gas transport, acetonitrile adsorption, and catalytic oxidation. These results demonstrate the potential of hierarchical CuCo 2 O 4 for rapid acetonitrile detection.

Читать у издателя →

Похожие статьи