Materialwissenschaft und Werkstofftechnik Машиностроение

Porous polymeric nanocomposites for biomedical applications

S. A. Bello, M. K. Adebayo, M. Y. Kolawole, F. O. Kolawole, D. A. Ajet‐Peters, A. O. Olowookere, S. D. Abubakar, Z. D. Adigun, M. O. Sulayman, S. W. Balogun, S. D. Daudu, A. M. Akintola, A. B. Jimoh, K. A. Ajao, J. Gabriel
Wiley · 2026-11-14 · DOI 10.1002/mawe.70186

Аннотация

Date seed, and bullock pod nanoparticles with up to 1 wt.% were used as reinforcement in polypropylene to develop biomedical materials. Microstructural, mechanical and antimicrobial tests were conducted. The maximum compressive strength recorded was 29.535 MPa ± 3.83 MPa at 0.2 wt.% date seed nanoparticle addition to the polypropylene matrix. This implies a 78 % increase. Comparison of properties of the polypropylene nanocomposites with bovine tibia trabecular bone show that compressive strength values of 0.6 wt.% bullock pod reinforced polypropylene (27.403 MPa ± 1.02 MPa), 0.2 wt.% date seed reinforced polypropylene (29.535 MPa ± 3.83 MPa), and 0.4 wt.% hybrid particle reinforced polypropylene (26.129 MPa ± 1.63 MPa), are greater than the 17.5 MPa ± 3.2 MPa of bovine tibia trabecular bone. The flexural strength of polypropylene reinforced with 0.6 wt.% bullock pod was 21.706 ± 2.03 MPa, exceeding the value of 18.7 MPa reported for bovine tibial trabecular bone. In contrast, the polypropylene composite reinforced with 0.2 wt.% date seed exhibited a lower flexural strength of 14.13 MPa ± 1.14 MPa. Furthermore, antimicrobial examinations indicated that date seed, bullock pod, and the 0.6 wt.% bullock pod‐reinforced polypropylene composite contain phytochemicals with potential antimicrobial properties.

Читать у издателя →