Advanced Engineering Materials Физика конденсированного состояния

Correlations Between Mechanical Properties and Dielectric Responses of CrNx Coatings Deposited via Modulated Pulsed Power Magnetron Sputtering

Yuge Li, Yunshan Leng, Feng Yang, Chenhao Yu, Zhixuan Song
Wiley · 2026-11-16 · DOI 10.1002/adem.71419

Аннотация

CrN x coatings deposited by modulated pulsed power magnetron sputtering (MPPMS) show the potential to be an epsilon‐near‐zero (ENZ) material in a large bandwidth ultraviolet region, and dielectric permittivity and mechanical parameters are also observed to show similar variation in CrN x coatings. Phase analysis reveals that all coatings are composed of dual‐phase structures of Cr 2 N and CrN. Notably, the Cr 2 N content exhibits a nonmonotonic dependence on nitrogen flow ratio: decreasing initially before increasing sharply when the nitrogen flow ratio exceeds 40% of the total working gas flux. Mechanical characterization demonstrates similar hardness ( H ≈ 24 GPa) and elastic modulus ( E ≈330 GPa) across specimens. However, coatings deposited under 40% display distinct H / E and H 3 / E 2 ratios. Dielectric spectroscopy reveals parallel trends, with the 40% N 2 flow ratio sample exhibiting maximum real part of dielectric permittivity, the dielectric permittivity then gradually approaches zero in a broad bandwidth ultraviolet region. Effective medium approximation modeling using the Bruggeman formalism predicts that tailored Cr 2 N/CrN phase modulation can achieve ENZ behavior across a broad ultraviolet spectral range. Crucially, the dielectric permittivity and mechanical parameter variation establish dielectric spectroscopy as a promising nondestructive method for toughness assessment in compositionally analogous coatings.

Читать у издателя →