Irreversibility Analysis of Magnetized Hybrid Nanofluid Stagnation Flow toward a Rotating Disk under Non-Uniform Quadratic Heat Generation

Engineering Research · Springer Nature · 2026-11-10 · DOI: 10.1007/s13369-026-11782-1

Аннотация

In this study, three-dimensional numerical simulation of unsteady fluid flow, heat transfer, entropy generation, and streamline topologies is presented for the flow over a rotating disk. The performance of a high-quality hybrid nanofluid with (MoS 2 +SiO 2 ) nanoparticles in the working fluid (kerosene oil) is compared with that of a traditional mono nanofluid with SiO 2 under unsteadiness variations and multiple walls slip conditions: radial velocity slip, azimuthal velocity slip, and thermal slip in the presence of Ohm’s law magnetic field. The absolute numerical convergence is validated with a rigorous grid independence diagnostics and stability analysis, which successfully limits the maximum mathematical residual within a strict order of magnitude of 9.85×10 –7 , while the CPU time remains under 2.5 s with very few nodes (240 nodes) on the grid. The parametric tracking results show that raising the parameter of the unsteadiness causes the velocity and thermal profiles to become tighter, as a result of the transient deceleration effects. On the contrary, increasing the multiple velocity slip parameters causes the surface shear stress to be suppressed, and the boundary layer entropy to build up less. On the other hand, Brinkman number represents a thermodynamically irreversible factor because of viscous heating. From the thermal point of view, the addition of the radiation parameter (0.0 to 1.0) greatly restricts the surface heat penetration which results in a decrease in the local Nusselt number of 24.56% for the hybrid mixture and 27.28% for the mono nanofluid. When space, temperature, and quadratic heat generation fields are varied, along with the thermal slip parameter, the energy’s internal fluid energy becomes more intense, thereby reducing the energy transfer rate further from the wall. The overall results indicate that the hybrid nanofluid has better thermal stability and controlled flow stability than the mono nanofluids, thus providing an optimized working fluid for the advanced aerospace propulsion system, microfluidic cooling system, high-speed electronic cooling system, and special rotating disk chemical reactor.

Читать у издателя →

Похожие статьи