International Journal of Metalcasting Metals and Alloys
Influence of Elevated Pressure During Solidification on the Microstructure and Electrical Conductivity of Commercial-Purity Aluminum
Abstract
Abstract Precise pressure control is a critical parameter in high-pressure die casting and squeeze casting of aluminum components, as pressure significantly influences microstructural evolution and, consequently, functional properties. While the behavior of pure aluminum at atmospheric pressure is well documented, its response to industrially relevant pressures in the range of 10–130 MPa remains insufficiently characterized. In this study, commercial-purity aluminum (99.7%) specimens were subjected to controlled pressures using a custom-designed press tool integrated with a hydraulic press system. Electrical conductivity, quantity of porosity, and grain structure were systematically evaluated as a function of applied pressure. The results reveal a nonlinear relationship: Conductivity increases with pressure up to an optimum value, followed by a measurable decline at higher pressures. Microstructural analysis indicates that this behavior is associated with pressure-induced modifications in grain morphology and defect distribution. These findings demonstrate that electrical conductivity in squeeze-cast aluminum can be tailored through controlled pressure application, providing a pathway for optimizing component performance in application-specific industrial environments.