Upgradation of Low-Grade Coal Pyrolysis through Co-Processing with Different Plastic Wastes

Journal of Umm Al-Qura University for Applied Sciences · Springer Nature · 2026-07-01 · DOI: 10.3103/S1068364X26600636

Аннотация

Abstract Low-grade coal, despite its low energy efficiency and high waste generation, can be effectively upgraded into fuel oil through co-pyrolysis with waste plastics. In this study, coal was co-pyrolyzed with polypropylene, polystyrene, and polymethylmethacrylate in equal ratios using a TGA and a semi-batch reactor to examine the effect of plastics on thermal degradation behavior, kinetics, and product distribution. The optimum degradation temperature ( T max ) values for pure coal and coal-polymer blends ranked as Coal > Coal-PP > Coal-PS > Coal-PMMA across all heating rates, indicating that thermal degradation depends on the nature of the polymer blended with the coal. Kinetic triplets were obtained using four isoconversional methods such as modified Coats-Redfern (mCR), Ozawa-Flynn-Wall (OFW), Starink, and Kissinger. The mCR, OFW, and Starink methods showed consistent activation energies of 121.55 kJ/mol (Coal), 314.67 kJ/mol (Coal-PMMA), 394.76 kJ/mol (Coal-PP), and 160.45 kJ/mol (Coal-PS). Copyrolysis boosted oil yield, highest for Coal-PP (40.55%), followed by Coal-PMMA (38.64%) and Coal-PS (38.58%), compared to 19% for coal alone. GC-MS analysis showed oils were rich in oxygenates, alkanes, and aromatics for PMMA, PP, and PS blends respectively. The kinetic parameters from this work could aid in designing reactors for the industrial conversion of low-grade coal and waste plastics into useful fuel feedstock.

Читать у издателя →

Похожие статьи