BaTiO 3 (BT), Bi 0.9 La 0.1 Fe 0.5 Nb 0.5 O 3 (BLNF), and 0.6BiFeO 3 –0.4BaTi 0.5 Nb 0.5 O 3 (BTN–BF) ceramics were synthesized by the conventional solid‐state reaction method to investigate composition–structure–property relationships in perovskite‐based systems. Rietveld refinement confirmed a tetragonal P 4mm structure for BT and BTN–BF, while BLNF exhibited a distorted rhombohedral R 3 c structure. UV–visible spectroscopy yielded optical bandgaps of 2.60, 1.95, and 2.00 eV for BT, BLNF, and BTN–BF, respectively, reflecting composition‐dependent electronic structures. Polarization–electric field measurements revealed substantially reduced remanent polarization and coercive fields in the modified compositions. Direct integration of the experimental hysteresis loops gave recoverable energy densities of 0.787, 9.816, and 9.783 mJ cm −3 for BT, BLNF, and BTN–BF, respectively, with corresponding energy efficiencies of 5.62%, 60.11%, and 55.02%. These results demonstrate that La/Nb modification and BiFeO 3 –BaTiO 3 composite formation effectively reduce polarization losses and enhance energy‐storage efficiency while also providing distinct routes for tuning the optical response.
S. S. Iswariya, Shibani Lakshman, Soumya G. Nair. Influence of La and Nb Modification on the Structural, Optical, and Ferroelectric Properties of BiFeO3‐ and BaTiO3‐Based Ceramics. // Advanced Engineering Materials. – 2026. – DOI: 10.1002/adem.71424. – URL: https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71424?af=R
S. S. Iswariya, Shibani Lakshman, & Soumya G. Nair (2026). Influence of La and Nb Modification on the Structural, Optical, and Ferroelectric Properties of BiFeO3‐ and BaTiO3‐Based Ceramics. Advanced Engineering Materials. https://doi.org/10.1002/adem.71424
S. S. Iswariya, et al. “Influence of La and Nb Modification on the Structural, Optical, and Ferroelectric Properties of BiFeO3‐ and BaTiO3‐Based Ceramics.” Advanced Engineering Materials, 2026. doi:10.1002/adem.71424.
@article{Iswariya2026,
title = {Influence of La and Nb Modification on the Structural, Optical, and Ferroelectric Properties of BiFeO3‐ and BaTiO3‐Based Ceramics},
author = {Iswariya, S. S. and Lakshman, Shibani and Nair, Soumya G.},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71424},
url = {https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71424?af=R}
}
ABSTRACT Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness...
ABSTRACT Environmentally sustainable processing of perovskite solar cells (PSCs) requires green solvent systems that can simultaneously produce high‐quality perovskite thin films with high efficiency and long‐term stability. Here, we...
ABSTRACT Defects at the surfaces and grain boundaries of perovskite films seriously restrict the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). While post‐treatment with organic cations is widely...
ABSTRACT A fundamental challenge in bioelectronics is to create an electrical bioadhesive interface that forms spontaneously, adheres robustly, and integrates seamlessly with dynamic tissues. While in‐situ hydrogels offer a potential...