Abstract This study examines the influence of mechanical activation (MA) and initial titanium powder properties on forced self-propagating high-temperature synthesis (SHS) compaction of Ti–C mixtures. MA of pure titanium powder substantially elevated its oxygen content from 0.3 to 2.0 wt %, whereas Ti + C mixtures exhibited minimal uptake (∼0.2–0.3 wt %) due to carbon black occlusion of titanium surface defects, enhancing reagent contact while inhibiting atmospheric oxidation. Ignition and combustion temperatures rose with oxygen concentration in titanium, independent of Ti–C interfacial area; however, burning velocity correlated directly with this area, increasing with MA time and declining with surface oxygen levels.
Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures. // Rheologica Acta. – 2026. – DOI: 10.3103/S1061386226700056. – URL: https://link.springer.com/article/10.3103/S1061386226700056
(2026). Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures. Rheologica Acta. https://doi.org/10.3103/S1061386226700056
“Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures.” Rheologica Acta, 2026. doi:10.3103/S1061386226700056.
@article{article34581,
title = {Effect of Mixing Conditions on Impurity Composition and Combustion Parameters of Ti + C Mixtures},
journal = {Rheologica Acta},
year = {2026},
doi = {10.3103/S1061386226700056},
url = {https://link.springer.com/article/10.3103/S1061386226700056}
}
Amorphous chalcogenide materials are of increasing interest for phase-change memory and threshold-switching device applications. However, the fast-switching behavior in the nanoscale regime is difficult to confirm and characterize in...
This study investigated the gilding microstructures and manufacturing techniques of a fifth-century Silla horse-harness fitting excavated from the grave-goods compartment of Hwangnam-dong Tomb No. 120-2 in Gyeongju, Korea. The specimen...
Three-dimensional (3D) integrated one-selector one-resistor (1S1R) cross-point arrays are emerging as a leading next-generation memory technology. Achieving both nonvolatile memory switching and volatile threshold switching within a...
Anatase titanium dioxide (TiO 2 ) is widely recognized for its superior photocatalytic capabilities due to its indirect band gap, low cost, and high chemical stability compared to other oxide semiconductors. Despite its advantages, TiO...
Abstract Nano-sized α-Fe 2 O 3 powders were synthesized via a starch-assisted gel-combustion method. The effects of fuel type, equivalence ratio (Φ), and ammonium nitrate addition on phase formation and crystallite size were...