Simulation-based investigation of asymmetric dual-material dielectric engineering in AlGaN/GaN MOS-HEMTs for enhanced DC, RF, and switching performance

Engineering in Extreme Environments · Springer Nature · 2026-11-12 · DOI: 10.1007/s10470-026-02676-1

Аннотация

Gate leakage current, parasitic gate–drain capacitance, and electric-field crowding remain key challenges in AlGaN/GaN MOS-HEMTs for high-frequency applications. To address these limitations, a Dual-Material Asymmetric Dielectric Thickness MOS-HEMT (DMADT-MOS-HEMT) is proposed, employing high- k HfO$$_2$$ (4 nm) at the source side and low- k Al$$_2$$O$$_3$$ (2 nm) at the drain side within an AlGaN/GaN heterostructure incorporating an AlInGaN back barrier. The asymmetric dielectric configuration enhances two-dimensional electron gas (2DEG) confinement near the source while suppressing parasitic gate–drain capacitance and drain-side electric-field crowding. Three device architectures — SDT-MOS-HEMT, ADT-MOS-HEMT, and the proposed DMADT-MOS-HEMT — are compared through Sentaurus TCAD simulations. The proposed DMADT-MOS-HEMT achieves a peak drain current of 1.73 A/mm, peak transconductance of 500 mS/mm, and a cutoff frequency ($$f_T$$) of approximately 54 GHz. In addition, the proposed device exhibits the lowest off-state drain current of approximately $$1\times 10^{-9}$$ A/mm, compared with $$8\times 10^{-9}$$ A/mm for the symmetric baseline structure.

Читать у издателя →

Похожие статьи