Chemical Engineering and Technology
Publisher: Wiley · ISSN 09307516 · 15 articles
-
Sustainable Reduction of Formaldehyde in MDF Using NaHCO 3 ‐Activated Carbon From Sanding Dust
ABSTRACT Medium‐density fiberboard (MDF) production generates sanding dust waste while releasing formaldehyde from urea–formaldehyde (UF) resins. In this study, MDF sanding dust was converted into activated carbon (AC) by pyrolysis at...
-
Estimation of Coalescence Parameters in an RDC Population Balance Model Solved by DuQMoGeM
ABSTRACT The rotating disk contactor (RDC) is widely used in liquid–liquid extraction because of its efficient hydrodynamics. In this work, a population balance model (PBM) coupled with an inverse modeling framework is developed to...
-
Particle Dynamics in Flake‐Laden Droplets Impacting on a Liquid Film
ABSTRACT Flake orientation and distribution strongly affect the appearance of metallic coatings. This study numerically investigates flake particle dynamics in a droplet impacting on a preexisting liquid film using coupled discrete...
-
Simulating Flow Rate Effects on Fields in Microwave Fixed‐Bed Reactors
ABSTRACT Microwave‐assisted fixed‐bed reactors offer high energy efficiency, but strong multiphysics coupling limits their predictability. In this study, we developed and validated a three‐dimensional (3D) finite‐element model against...
-
Thermal Transport in Electromagnetic MTHNF Thin Films With Darcy–Forchheimer Drag
ABSTRACT This study investigates the heat‐transfer characteristics of an electromagnetichydrodynamic (EMHD) thin‐film flow of a micropolar ternary hybrid nanofluid (MPTHNF) over a porous surface, accounting for Darcy–Forchheimer drag,...
-
Green Process Engineering of ZrO 2 @CuO Nanocomposites With Tunable Structure–Property Features
ABSTRACT Clerodendrum inerme leaf extract served as a reducing and stabilizing agent in the green production of ZrO 2 @CuO nanocomposites. Controlled CuO addition (10–20 wt%) resulted in well‐crystalline monoclinic/tetragonal ZrO 2 and...
-
Solid Particle Suspension Characteristics in a Self‐Priming Jet Stirred Tank
ABSTRACT Stirring operation focusing on particle suspension was widely used in the solid–liquid two‐phase mixing process. The suspension characteristics of solid particles in a self‐priming jet stirring tank were investigated through a...
-
Quantifying Interstage Backflow and Conversion Loss in CSTR Cascades Using Analytical Models and CFD
ABSTRACT Continuous stirred tank reactor (CSTR) cascades approximate plug‐flow behavior, but interstage backflow can reduce conversion. This study combines analytical modeling and CFD to quantify this effect. For first‐order kinetics,...
-
Data‐Driven Monitoring and Early Warning of Valve Plate Loss in Compressor Valves
ABSTRACT This article addresses weak signals of valve plate loss in reciprocating compressor valves and limitations of traditional methods. A data‐driven early‐warning approach combining multidimensional distance‐metric‐based...
-
Purification of 2,6‐Dimethylnaphthalene From Light Cycle Oil
ABSTRACT Recovering 2,6‐dimethylnaphthalene (2,6‐DMN) from light cycle oil (LCO) requires removal of the complex hydrocarbon matrix followed by selective separation of the closely related DMN isomers. An integrated process comprising...
-
NaBH 4 Activation of Cobalt‐Based Catalytic Membranes for Enhanced Nitro‐Aromatic Hydrogenation
ABSTRACT High‐performance catalytic membranes are vital for efficient reactors, yet surface posttreatments remain underexplored. We developed a facile flow‐through NaBH 4 modification for cobalt‐loaded ceramic membranes (Co@CM). NaBH 4...
-
A Multistage Statistical Framework for Curve‐Family Model Selection
ABSTRACT Empirical models are widely used to represent families of experimental curves in chemical engineering phenomena, such as drying kinetics, thermal degradation kinetics, osmotic dehydration, and equilibrium moisture isotherms;...
-
Photo‐Assisted Adsorption of Rhodamine 6G Using TiO 2 –AC Composite: BBD Optimization and ANN Modeling
ABSTRACT This study investigated the photo‐assisted adsorption optimization of rhodamine 6G (Rh6G) on a TiO 2 –activated carbon composite using the Box–Behnken design (BBD) and artificial neural network (ANN) models. Characterization of...
-
Process Optimization for the Photodegradation of Methylene Blue Dye Over CuO/AC Catalyst
ABSTRACT A nanofiber of copper oxide on activated carbon (CuO/AC) was synthesized by mechanochemical process. X‐ray diffractometer (XRD), Fourier‐transform infrared spectroscopy (FTIR), S BET , scanning electron microscopy (SEM),...
-
Experimental and Theoretical Study of Diphenoxylate Solubility in Supercritical CO 2
ABSTRACT This study investigated the solubility of diphenoxylate in supercritical CO 2 with and without methanol as a cosolvent (2 and 4 mol%) at pressures of 170–410 bar and temperatures of 308–348 K. In pure supercritical CO 2 ,...