Structural Design of Tall and Special Buildings
Publisher: Wiley · ISSN 15417794 · 12 articles
-
Study on Seismic Performance of High‐Strength Steel Frames With Double‐Damage Elements
ABSTRACT In this paper, an earthquake resilient beam‐column joint of high‐strength steel with double‐damage elements was proposed. Its seismic performance is studied at three levels: metal damper, beam‐column joint, and frame. The study...
-
A Novel Self‐Centering Friction Energy Dissipative Brace: Experimental Investigation and System Response
ABSTRACT This paper reports a novel self‐centering friction energy dissipative brace (SFEB) consisting of the friction damper and the preload combined disc spring working in parallel. The configuration, assembly process, and working...
-
Dynamic Response and Multiobjective Optimization of a Hybrid SCS‐GDAF Energy Absorbing Panel Under Impact Load
ABSTRACT In this study, a novel hybrid energy absorbing panel consisting of a steel‐concrete‐steel (SCS) sandwich panel and graded‐density aluminum foam (GDAF) was proposed and referred to as the SCS‐GDAF energy absorbing panel. Unlike...
-
Seismic Behavior Research of IFW Assembled Shear Wall
ABSTRACT In view of the current challenges associated with composite shear walls, this paper innovatively integrates the advantages of both wall types. The connection structure and manufacturing process of prefabricated walls are...
- Issue Information
-
Performance Evaluation and Surrogate Optimization of an NCW–VFD Stiffness–Damping Zoned Seismic Mitigation System for Laboratory Buildings With Open Lower Stories
ABSTRACT Laboratory buildings with open lower stories require simultaneous control of lower‐story drift and floor acceleration in equipment‐sensitive upper stories, whereas a single stiffness‐ or damping‐based control mechanism is often...
-
Intelligent Building Space Planning and Optimization Using Artificial Intelligence
ABSTRACT Optimizing building space has become increasingly important in contemporary architectural design, where traditional planning methods often struggle to achieve efficient space utilization and effective coordination among...
-
Performance Analysis and Optimization of Distributed Tuned Mass Damping System for Tall Buildings Under Wind‐Induced Translational and Torsional Coupling Response
ABSTRACT As super tall buildings trend toward greater height and flexibility, wind‐induced vibration has emerged as a critical factor affecting their safety and comfort. Tuned mass dampers (TMDs) suffer from limitations such as large...
-
Nonlinear Modeling of Concrete‐Filled Composite Coupling Beams in Coupled SpeedCore Systems
ABSTRACT This study shows the development and comparative evaluation of advanced nonlinear inelastic three‐dimensional finite element modeling (FEM), two‐dimensional FEM, and simple fiber‐section‐based FEM for concrete‐filled composite...
-
Numerical Simulation of Flow Field and Wind Pressure on Ultra‐High Hyperbolic Steel Cooling Towers Under Varying Porosity Conditions
ABSTRACT Cooling towers are highly sensitive to wind loads. Variations in bottom porosity give rise to complex flow field and wind pressure characteristics, and existing codes show insufficient applicability. Taking a 21‐story...
-
Axial Compression Behavior of Pre‐Damaged SRC Short Columns Subjected to Chloride Salt Corrosion
ABSTRACT To investigate the axial compression performance of pre‐damaged steel‐reinforced concrete (SRC) columns under chloride corrosion, this study first analyzed the material degradation mechanism of steel and concrete. Pre‐damage...
-
Predicting Shear Strength of Exterior RC Beam–Column Joints Using Regression and Machine Learning Models
ABSTRACT Accurately predicting the shear strength of exterior reinforced concrete (RC) beam–column joints remains challenging due to the complex interaction of geometric and material parameters and inconsistencies among existing...