International Journal of Circuit Theory and Applications
Publisher: Wiley · ISSN 00989886 · 15 articles
-
A Novel Nonisolated Step‐Up/Down DC–DC Converter With a Wide Voltage Gain Range
ABSTRACT This paper proposes a novel nonisolated step‐up/down DC–DC converter derived from the differential integration of conventional noninverting buck–boost and buck–boost converters, referred to as the DINiB 4 topology. The proposed...
-
Resource‐Efficient Real‐Time Frequency Stitching DAC System With Structured‐Sparse Farrow Sampling Rate Conversion
ABSTRACT The real‐time frequency stitching digital‐to‐analog converter (FS‐DAC) system for wideband waveform generation with variable input rates requires sampling rate conversion (SRC) because its DAC images move while the analog...
-
Euclidean Norm Energy Minimization for Resonant Converters
ABSTRACT This paper introduces a formulation for resonant converters that links the Euclidean norm of an energy‐related state vector to the total energy stored in the converter reactive elements. The proposed method is constructed based...
-
Single‐Phase Inverter With Sensorless Observer Control and Multi‐Order Harmonic Compensation
ABSTRACT This paper proposes a sensorless control strategy for a single‐phase inverter based on a discrete‐time state observer. The proposed observer accurately reconstructs the AC‐side capacitor current, enabling capacitor current...
-
A 510 GHz MMIC Tripler Based on a Two‐Port Four‐Structure Parasitic Extraction Method
ABSTRACT This paper presents a 510 GHz monolithic frequency tripler based on GaAs Schottky barrier diodes (SBDs). The performance of the multiplier is optimized by integrating a streamlined modeling approach with advanced fabrication....
-
From Maxwell's Equations to Network Equations of Lumped Circuits: A Derivation Based on Electric‐Field and Current Components
ABSTRACT Conventional circuit analysis treats electric circuits as a graph consisting of nodes and branches and assumes that the branch currents and branch voltages comply with Kirchhoff's current law (KCL) and Kirchhoff's voltage law...
-
Hexagonal Switched Cell (HSC) Based Active Front End (AFE) Converter for Simultaneous and Stiff Charging of DC‐Link Capacitors in Ultracapacitor Applications
ABSTRACT This work presents a hexagonal switched cell (HSC) based active front end (AFE) converter for simultaneous charging and regulation of split DC‐link capacitors in ultra capacitor based applications. The proposed HSC based...
-
A Near‐Full‐Cycle Phase‐Tunable Directional Coupler With Enhanced In‐Band Phase Flatness
ABSTRACT In this paper, a phase‐tunable directional coupler with near‐full‐cycle phase tuning range and enhanced in‐band phase flatness is proposed and demonstrated. The design utilizes a reflective‐type phase shifter (RTPS) consisting...
-
Multi‐Frequency Operated Series Resonant Inverter for All‐Utensil IC Applications
ABSTRACT In induction cooking applications, a full‐bridge inverter supplies a high‐frequency current to heat ferromagnetic or non‐ferromagnetic pans. Existing induction cookers typically heat ferromagnetic pans. This is a well‐known...
-
A Two‐Stage Constant‐Voltage Wireless Power Transfer System and Its Design Method for Robotic Manipulators
ABSTRACT To address the problems of limited motion range, cable wear, and reduced reliability caused by conventional power cables during continuous rotation of robotic manipulator joints, this paper proposes a two‐stage constant voltage...
-
A High‐Input‐Impedance Chopper‐Stabilized Current‐Feedback Instrumentation Amplifier for High‐Precision Multimeter Front Ends
ABSTRACT Instrumentation amplifiers are essential front‐end circuits in high‐precision digital multimeters, since their noise, offset, common‐mode rejection, and input impedance directly determine measurement accuracy. Current‐feedback...
-
Study on Linear Active Disturbance Rejection Control for Current Regulation in a Fast‐Frequency Pulsed Welding Power Supply
ABSTRACT Fast‐frequency pulsed welding power supplies require current regulation across changing load and dc‐bus conditions. This study develops an application‐oriented linear active disturbance rejection control (LADRC) implementation...
-
A 1.25‐GS/s SAR ADC With Scalable Input and 3–6‐Bit Reconfigurable Resolution for Operation Unit‐Based RRAM–CIM Architectures
ABSTRACT The operation unit (OU)‐based architecture is widely adopted in resistive random access memory‐based compute‐in‐memory (RRAM–CIM) macros. As the OU size may vary across different designs and under different workloads, the...
-
A 6.2‐bit Charge‐Sharing Noise‐Shaping SAR ADC Using Flexible Oxide TFT Technology
ABSTRACT This work presents a 5‐bit successive approximation register (SAR) analog‐to‐digital converter (ADC) implemented using unipolar, single‐gate amorphous indium‐gallium‐zinc‐oxide (a‐IGZO) thin‐film transistors (TFTs). The circuit...
-
Adaptive Dual Active Bridge Converter With LCL Filter Using Switch‐Controlled Capacitor for Inductance Variation Compensation
ABSTRACT LCL‐type dual‐active‐bridge (DAB) converters offer high power density but are analytically sensitive to deviations in resonant parameters. Variations in inductance, often reaching 25% due to thermal factors and magnetic...