Multifunctional superhydrophobic materials show broad application prospects as promising substitutes for conventional liquid food packaging. Quercetin (QUE), renowned for its significant antioxidant and antibacterial properties, emerges as an ideal candidate for liquid food packaging materials. However, the poor antiadhesion and stability of QUE have hindered its long‐term application in food packaging. To address these limitations, we have developed a food‐contact‐compatible superhydrophobic coating (Wax@Q/S2) based on starch, incorporating QUE and shellac to impart antioxidant activity and enhance mechanical properties, thereby potentially compensating for QUE's shortcomings while retaining its advantages. This coating demonstrates exceptional antiadhesion properties, evidenced by a water contact angle of 154.9° and a sliding angle of 1.7°. In practical liquid food packaging tests, it significantly reduced yogurt residue to 0.16% ± 0.02% on paper cups and 0.44% ± 0.05% on polypropylene (PP) cups, achieving >99.5% food recovery efficiency. Additionally, the coating exhibits excellent oxidation resistance, immersion stability, and mechanical stability. The successful application of this coating in liquid food packaging, as confirmed by preservation experiments on milk and grapes (e.g., maintaining 92% of grape weight over 14 days), underscores its potential as a novel approach for preparing multifunctional food‐contact‐compatible packaging materials.
Hewei Yang, Meng Wang, Ning Tian, Qianyuan Liu, Yukai Zhang, Azamati Dabuerjiang et al. Food‐Contact‐Compatible Superhydrophobic Coating Based on Starch for Low Adhesion and Fresh Preservation. // Advanced Engineering Materials. – 2026. – DOI: 10.1002/adem.71217. – URL: https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71217?af=R
Hewei Yang, Meng Wang, Ning Tian, Qianyuan Liu, Yukai Zhang, Azamati Dabuerjiang, Xiaoman Ma, & Zhaofeng Wu (2026). Food‐Contact‐Compatible Superhydrophobic Coating Based on Starch for Low Adhesion and Fresh Preservation. Advanced Engineering Materials. https://doi.org/10.1002/adem.71217
Hewei Yang, et al. “Food‐Contact‐Compatible Superhydrophobic Coating Based on Starch for Low Adhesion and Fresh Preservation.” Advanced Engineering Materials, 2026. doi:10.1002/adem.71217.
@article{Yang2026,
title = {Food‐Contact‐Compatible Superhydrophobic Coating Based on Starch for Low Adhesion and Fresh Preservation},
author = {Yang, Hewei and Wang, Meng and Tian, Ning and Liu, Qianyuan and Zhang, Yukai and Dabuerjiang, Azamati and Ma, Xiaoman and Wu, Zhaofeng},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71217},
url = {https://advanced.onlinelibrary.wiley.com/doi/10.1002/adem.71217?af=R}
}
ABSTRACT Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness...
ABSTRACT Environmentally sustainable processing of perovskite solar cells (PSCs) requires green solvent systems that can simultaneously produce high‐quality perovskite thin films with high efficiency and long‐term stability. Here, we...
ABSTRACT Defects at the surfaces and grain boundaries of perovskite films seriously restrict the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). While post‐treatment with organic cations is widely...
ABSTRACT A fundamental challenge in bioelectronics is to create an electrical bioadhesive interface that forms spontaneously, adheres robustly, and integrates seamlessly with dynamic tissues. While in‐situ hydrogels offer a potential...