Materials and Corrosion
Издатель: Wiley · ISSN 09475117 · 15 статей
-
Influence of Hydrogen Absorption on the Corrosion Behaviour of Copper With Various Surface Finishes
ABSTRACT Copper acts as the corrosion barrier for many used fuel containers (UFC) around the world. Continuous irradiation can form hydrogen that builds up next to the copper surface during the extremely long service‐life required for...
-
Effect of Trace Lanthanum Microalloying on Pitting Corrosion Resistance of C12200 Precision Copper Tubes in Chloride Environment
ABSTRACT Chloride‐induced pitting corrosion is a critical factor limiting the service life of C12200 precision copper tubes for air‐conditioning heat exchangers. In this work, industrial C12200 copper tubes with 0, 7 and 12 ppm trace...
-
Film Formation Behavior and Corrosion Protection Mechanism of Silane‐Enhanced PAA/Zn Composite Coating on Carbon Steel Surface
ABSTRACT This study aims to replace traditional chromium‐containing conversion coatings and overcome the drawbacks of polyacrylic acid (PAA) films, including slow formation, high hydrophilicity, and limited stability. A synergistic...
-
Mechanism of Concrete Structure Failure Induced by the Corrosion Acceleration Test of Embedded Steel by the Anodic Polarization
ABSTRACT An iron specimen embedded in a cement test block was anodically polarized to investigate corrosion and cracking by measuring compressive force with a load cell. The specimen exhibited two stages: unchanged force in Stage I and...
-
The Effect of Heat Treatment on the Localized Corrosion Susceptibility of Extruded AA6063 Alloys With High Amount of Tramp Elements
ABSTRACT The growing use of secondary aluminium alloys requires understanding how trace amounts of Cu and Zn interact with heat treatment to affect corrosion. One primary and 3 secondary AA6063 variants were compared before and after T6...
-
The Initiation, Progression, and Stifling of Micro‐Galvanic Corrosion on Cu in Anoxic Aqueous Sulfide Solutions
ABSTRACT The growth of Cu 2 S films and the initiation and progression of micro‐galvanic corrosion underneath them were investigated after exposure of Cu to anoxic 0.1 M Cl − solutions containing SH − at concentrations ranging from 10...
-
Wear Resistance and Liquid Zinc Corrosion Resistance of Fe–B Alloys: A Review
ABSTRACT Fe–B alloys with Fe 2 B as the hard phase exhibit excellent wear resistance, liquid zinc corrosion resistance, and low raw material cost, showing broad prospects in metallurgy and hot‐dip galvanizing. This review summarizes the...
-
Corrosion Resistance of Different Coatings on Titanium Surface: A Systematic Review
ABSTRACT Titanium is widely used in dental implants due to its excellent mechanical and biocompatibility, but it is susceptible to corrosion in the oral environment. Various surface coatings have been developed to enhance corrosion...
-
Characterization of the Corrosion of Copper Materials Exposed to Anoxic Gaseous Hydrogen Sulfide Environments
ABSTRACT In this study, the corrosion behavior of electrodeposited and cold‐sprayed copper materials were systematically investigated under controlled exposure to hydrogen sulfide (H 2 S) gas in an inert atmosphere, with emphasis on the...
-
Role of Si Alloying in the Microstructure Evolution and Corrosion Performance of ZnAlMg Coatings
ABSTRACT The impact of Si addition on the microstructure and corrosion behavior of ZnAlMg coatings prepared in a laboratory simulator using several thermal application regimes for each coating composition is described. The coatings...
-
Corrosion Failure Mechanisms of Low‐Hydrogen‐Embrittlement Zn‐Ni Coatings for Engineering Applications: Localized Pitting and Galvanic Effect With Aluminum Alloy
ABSTRACT This study systematically investigates the localized and galvanic corrosion failure mechanisms of low‐hydrogen‐embrittlement Zn‐Ni alloy coatings, a promising eco‐friendly alternative to toxic Cd plating for protecting...
-
Investigation of the Effects of Surface and Heat Treatment on the Corrosion Behavior of Additively Manufactured AlSi10Mg
ABSTRACT This work investigates the influence of surface finish and heat treatment on the corrosion behavior of additively manufactured (AM) AlSi10Mg to provide practical recommendations for manufacturing and post‐treatment....
-
The Use of Low‐Cost Commercial Hydrogen Sensors for Thermal Desorption Research
ABSTRACT The corrosion of metallic materials under anoxic deep geological repository (DGR) conditions inevitably results in the evolution of hydrogen. From a research perspective, this hydrogen provides an approach to understanding the...
-
Corrosion Analysis of Helical Electrodes
ABSTRACT Low‐voltage electrode steam boilers are core pressure‐bearing equipment for clean heating. However, the observed asymmetric corrosion of helical electrodes remains mechanistically unclear, which cannot be explained by existing...
-
Effect of Heat Treatment on Hydrogen Embrittlement of Electrodeposited Copper
ABSTRACT The present work investigates the tensile behavior of a copper coating electrodeposited onto steel that had been prepared in an acid bath after heat treatment. The copper is brittle at slow strain rates (1 × 10 −6 s −1 ) but...