Polymer Engineering and Science
Издатель: Wiley · ISSN 00323888 · 15 статей
-
Structure–Processing Relationships in Nanomodified Urea–Formaldehyde Adhesives: Effects of Inorganic and Cellulosic Nanomaterials on Rheology and Curing Behavior
ABSTRACT Modifying urea–formaldehyde (UF) adhesives with nanomaterials offers opportunities to tailor rheological properties and curing behavior for wood‐based composite manufacturing. This study comparatively investigates four...
-
Experimentally Constrained GPC Deconvolution for Reconstructing the Molecular‐Weight Distribution of the Inaccessible High‐Molecular‐Weight Contribution in Bimodal HDPE Produced by Cascade‐Reactor Slurry Polymerization
ABSTRACT Characterization of the high‐molecular‐weight (HMW) fraction is essential for understanding the molecular architecture and performance of bimodal HDPE, yet this fraction cannot be directly isolated and characterized after the...
-
Manufacturing of Single‐Material Sandwich Structures via Vacuum‐Assisted Rotational Foam Molding for Lightweight Applications
ABSTRACT Economic and environmental sustainability are driving the demand for material‐efficient and lightweight polymer structures. This study presents a new one‐shot process strategy for manufacturing single‐material sandwich...
-
Investigating the Properties of Partially Hydrolyzed Polyester‐Cotton Waste Recycled to Non‐Fiber Applications
ABSTRACT Despite increasing amounts of textile waste, its complex and often heterogeneous nature has led to lagging recycling rates. Polyester, the most common material, is often found in combination with cotton, the second‐most common....
-
Thermal, Spectroscopy, and Mechanical Properties of Thermodegradable Polymers and Reinforcement
ABSTRACT Poly(lactic acid) (PLA)/cellulose nanocrystal (CNC) films were prepared to determine how dicumyl peroxide (DCP) and a lactic acid (LA)/tin(II) 2‐ethylhexanoate/triphenylphosphine system affect thermal transitions, morphology,...
-
High‐Strength, High‐Toughness, and Weather‐Resistant Polyurethane Elastomers Enabled by Synergistic Oxamide‐Derived Multiple Hydrogen Bonds
ABSTRACT The strength‐toughness trade‐off, compounded by degradation induced by environmental aging, remains a major obstacle to the long‐term service of polyurethane elastomers. Herein, we report a transparent and weathering‐resistant...
-
Robust PDMS / PVDF ‐ HFP / ZrO 2 Superhydrophobic Coating for Efficient Daytime Radiative Cooling
ABSTRACT Passive daytime radiative cooling (PDRC) materials can achieve sub‐ambient cooling without external energy input by reflecting sunlight (0.3–2.5 μm) and radiating heat into outer space through the atmospheric window (8–13 μm)....
-
Adhesive Interaction of Polymeric Ligands With the γ‐ Al 2 O 3 Surface as a Basis for Searching for Stable Catalysts for Fischer–Tropsch Synthesis: Quantum Chemistry and Molecular Dynamics
ABSTRACT The adhesive interaction of polymeric ligands (poly(ethylene terephthalate) (PET), poly(methyl methacrylate) (PMMA), poly(propylene carbonate) (PPC), polystyrene (PS), and polypropylene (PP)) with the oxidized aluminum surface...
-
Highly Ductile PETG / POE /Fe 3 O 4 Multi‐Responsive Shape‐Memory Polymer for 4D Printing
ABSTRACT In this work, we fabricated PETG/POE/Fe 3 O 4 nanocomposites via melt blending at a fixed 4:6 PETG‐to‐POE mass ratio with varying Fe 3 O 4 loadings, aiming to develop a magnetic–near‐infrared dual‐responsive shape‐memory...
-
Development of a High‐Strength Two‐Component Polyurethane Structural Adhesive for Extreme Cryogenic Environments
ABSTRACT Structural adhesives used in liquefied natural gas (LNG) containment systems must retain reliable load transfer under severe thermomechanical mismatch near the boiling point of methane (approximately −163°C). Here, a series of...
-
Molecular Regulation of Polyethersulfone Dielectric Composites for Enhanced Dielectric Constant and Energy Storage Performance
ABSTRACT In the design of polyether sulfone (PESU)‐based dielectric composites, a molecular regulation strategy was adopted in order to synergistically improve key physical parameters, for instance, energy storage performance and...
-
Influence of Matrix Selection and Drawing Conditions on TLCP Reinforcement in High‐Modulus Composites for Material Extrusion Additive Manufacturing
ABSTRACT Vectra B950 (VB950) was co‐extruded with polyamide 6 (PA6) and poly(etherimide) (PEI) to compare reinforcement development in matrices with contrasting rheological responses and thermal processing requirements. Within the...
-
Imidazolium‐Based Ionic Liquids for PET Glycolysis: A Sustainable Approach for Plastic Waste
ABSTRACT The chemical recycling of polyethylene terephthalate (PET) offers a promising route for recovering valuable monomers from postconsumer plastic waste. This study investigates imidazolium‐based ionic liquids as facilitators for...
-
Segregated MWCNT Networks in XNBR via Interfacial Assembly for Enhanced Mechanical, Dielectric, and EMI Shielding Performance
ABSTRACT Segregated networks of carboxylated multiwalled carbon nanotubes (MWCNTRs) were developed in carboxylated acrylonitrile–butadiene rubber (XNBR) through latex‐stage processing. The composites exhibited a low electrical...
-
Fabrication of Polyethylene Fibrous Membranes via Supercritical CO 2 ‐Assisted Gel Preparation and Melt Differential Electrospinning
ABSTRACT Melt electrospinning is considered a promising and scalable route for manufacturing polyethylene (PE) fibrous membranes. However, the high viscosity of polyethylene melts during melt electrospinning often leads to unstable jet...