Curing of epoxide binder in the presence of oxidized PAN-TT modified by AGM-9 was shown to occur under milder conditions than for unfilled matrices. This was probably due to chemical interaction between organic functional groups of 3-aminopropyltriethoxysilane deposited beforehand onto the surface of the starting polyacrylonitrile cord and active epoxide oligomers that resulted in high adhesive interaction at the interface between the fiber and matrix in the composite. This was confirmed by scanning electron microscopy and led to increased resistance of composite samples to mechanical loads and their improved heat resistance.
Evaluation of the Possibility of Using Oxidized Polyacrylonitrile Cord Modified By Finish AGM-9 to Reinforce Epoxide Composite Materials. // Plant Foods for Human Nutrition. – 2026. – DOI: 10.1007/s10692-026-10667-1. – URL: https://link.springer.com/article/10.1007/s10692-026-10667-1
(2026). Evaluation of the Possibility of Using Oxidized Polyacrylonitrile Cord Modified By Finish AGM-9 to Reinforce Epoxide Composite Materials. Plant Foods for Human Nutrition. https://doi.org/10.1007/s10692-026-10667-1
“Evaluation of the Possibility of Using Oxidized Polyacrylonitrile Cord Modified By Finish AGM-9 to Reinforce Epoxide Composite Materials.” Plant Foods for Human Nutrition, 2026. doi:10.1007/s10692-026-10667-1.
@article{article36428,
title = {Evaluation of the Possibility of Using Oxidized Polyacrylonitrile Cord Modified By Finish AGM-9 to Reinforce Epoxide Composite Materials},
journal = {Plant Foods for Human Nutrition},
year = {2026},
doi = {10.1007/s10692-026-10667-1},
url = {https://link.springer.com/article/10.1007/s10692-026-10667-1}
}
Volumetric filters with low hydraulic resistance were shown to be advisable for filtering viscoelastic ultra-high-molecular-weight polyethylene (UHMWPE) spinning solutions. Solution flow through them is not associated with a significant...
Modification of chitosan of various molecular masses by active (black 4CT) and acidic dyes (violet 43) to produce new colored biopolymer derivatives was studied. The synthesis conditions, including reagent concentrations, temperature,...
A model has been developed to predict the degree of impregnation of a fabric made of polypropylene fibers with a linear density of 0.66 tex and a bulk density of 85 kg/m 3 based on two technological variables, such as the polyurethane...
Results from development of a Polikon C cation-exchange membrane by polycondensation filling in situ based on novolac phenol-formaldehyde fibrous material are reported. The use of a fibrous matrix as a nanoreactor was shown to allow the...
Results of targeted modification of dimethylformamide solutions of polyesterurethanes (PEUs) by poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), and collagen hydrolysate (PRC) to create fibrous-porous composite materials and facing...