Modeling Degree of Impregnation of Nonwoven Needle-Punched Fabric from Polypropylene Fibers with Polyurethane Dispersion

Plant Foods for Human Nutrition · Springer Nature · 2026-01-01 · DOI: 10.1007/s10692-026-10672-4

Аннотация

A model has been developed to predict the degree of impregnation of a fabric made of polypropylene fibers with a linear density of 0.66 tex and a bulk density of 85 kg/m 3 based on two technological variables, such as the polyurethane concentration in an aqueous dispersion and the gap between the squeezing rollers. The degree of impregnation of the fabric with a relatively low density depends on the gap between the squeezing rollers and negligibly on the concentration of polyurethane in the aqueous dispersion. The degree of fabric impregnation is regulated with a gap of less than 0.25 mm between the squeezing rollers. If the gap is wider, the impregnation degree reaches the limit at different polyurethane concentrations.

Читать у издателя →

Похожие статьи