International Journal of Metalcasting
Publisher: Springer Nature · ISSN 1939-5981,2163-3193 · 691 articles
-
Influence of Sand Properties on Core Production Quality and Performance
Abstract This study examined the chemical and mechanical behaviour of fresh silica sand, green sand-related materials, and mechanically reclaimed sand used in cold-box core production. The work was conducted in the context of sand...
- Numerical and Experimental Investigation of Ultrasonic-Assisted Semi-continuous Casting for Microstructure Homogenization in Large-Scale Al–Cu Alloy Cylindrical Hollow Billets
- Influence of Oxide-Based Face-Coat Materials on Mould Permeability and Interfacial Reactions during AZ91 Magnesium Alloy Investment Casting
- Optimizing Annealing Heat Treatment for Improved Ductility in Recycled High-Pressure Die Cast AlSi7MnMg Alloy
- Collaborative Optimization of Shrinkage Cavity Volume and Deformation in Precision Centrifugal Casting of Thin-Walled Gear Transmission Cases
- Investigation of the Effects of Mn Content on Deformation Capability, Microstructure, and Hardness in Steel Materials
- Additive Manufacturing-Integrated Rapid Investment Casting of Aluminum Dies: Performance Evaluation of Dimensional Accuracy, Surface Roughness, and Integrity in Injection Molding of Polymers
- IoT-Enhanced Simulation of Dimensional Deformation and Shrinkage Porosity in CoCrMo Alloy Femoral Condyle Investment Castings
- Zinc Recovery from Zamak Dross via Vacuum Distillation
- Non-Metallic Inclusions and Microstructure of Microalloyed C-Mn Steel via Titanium Multiple Deoxidation Process
-
Calculation of Liquidus Temperature of Practical Al–Si–Cu Alloys Using the ESTPHAD Method
Abstract Accurate knowledge of the liquidus temperature of aluminium alloys is essential for the design and control of solidification processes. In this study, the ESTPHAD (ESTimation of PHAse Diagram) method is applied to calculate the...
- A Novel Method for Quantifying Residual Hydrogen in Aluminum Alloys
- Influence of TiC Particles on Microstructure, Properties, and Cu Diffusion in TiC/2319 Composites
- Microstructure, Wear and Corrosion Properties of In-Situ TiC and Ex-Situ SiC Reinforced Ni-Based Laser Cladding Coatings on KmTbCr15Mo High-Chromium Cast Iron
- Prediction Model of Microstructure Evolution for Long-Flow Thin-Walled Al-Si-Cu Alloy Die Casting Components
- Investigating Porosity Tolerance and its Impact on the Deformation Behavior of HPDC Al-8Si-0.5Mn-0.5Mg-0.2Cu-3Zn Alloys
- Mechanical Behaviour and Microstructural Insights of ZE42 Magnesium Alloy Reinforced with Hybrid TiO2 and Graphene Nanoplatelets
-
Effect of TiC Reinforcement on the Microstructure and Performance of AA2014 Composites Fabricated via Vortex-Assisted Sand Casting
Abstract Recent advances in manufacturing technologies have significantly increased the demand for materials exhibiting superior mechanical performance and reduced thermal expansion, particularly in the defense, automotive, and...
- Influence of Manganese, Nickel, Molybdenum and Chromium on the Improvement of Mechanical Properties and Wear Performance of a Spheroidal Graphite Cast Iron
-
Production and Characterization of Carbide-Free Cast Bainitic Steels with Two Different Mn Contents
Abstract Carbide-free bainitic steels (Fe–0.8C–1.7Si–0.9Al–1.2Cr–0.2Mo) with two different Mn concentrations (1.4 and 2.0 wt.%) are produced via conventional sand-casting technique. Computational JmatPro calculations were performed to...
-
Review of the Effects of Rare Earth Element Additions to Magnesium Alloys on Biocompatibility: An Evaluation from Mechanical, Corrosion, and Biological Perspectives
Abstract Rare earth elements (REE), the subject of this study, have become a growing focus of interest in biomaterials research in recent years, particularly in magnesium (Mg) and high-entropy alloys (HEA). These studies demonstrate...
-
Influence of Eu on the Oxide Structure of A356 Melts
Abstract Europium (Eu) has recently attracted attention as an alternative modifier to conventional elements such as Sr, Na, and Sb for eutectic Si refinement in Al–Si cast alloys. Although the modification effect of Eu has been widely...
-
Austempering Temperature and Isothermal-Holding Effects on the Microstructure and Mechanical–Tribological Response of Si–Mo Alloyed Ferritic Ductile Iron Produced by SSF
Abstract This study investigates the influence of austempering temperature and isothermal-holding time on the microstructure, mechanical behavior, and tribological performance of Si–Mo alloyed ferritic ductile iron produced by the...
- The Influence of Microstructure on Mechanical and Tribological Behavior of Cast Zn–Al-Based Alloys: A Review
- Modulation of the Microstructure and Properties of an Al-6Mg Aluminum Alloy (5A06) via the Synergistic Effect of Pulsed Magnetic Fields and Rare Earth Yb
-
Influence of Elevated Pressure During Solidification on the Microstructure and Electrical Conductivity of Commercial-Purity Aluminum
Abstract Precise pressure control is a critical parameter in high-pressure die casting and squeeze casting of aluminum components, as pressure significantly influences microstructural evolution and, consequently, functional properties....
- Production and Characterization of AZ91E Magnesium Alloy Hybrid Composites Reinforced with Boron Carbide and Aluminum Oxide via Advanced Semisolid Ultrasonic Stir-Casting Process
- Variations in Ductility and Microstructure in HPVDC AlSi10MnMg Alloy: Influence of Process-Induced Externally Solidified Crystals and Intermetallic Distribution
- Influences of Casting Parameters on Microstructure and Mechanical Properties of Ductile Iron in Permanent Mold
- Preparation and Microstructure Characterization of Nb-Stabilized Single-Crystalline Austenitic Stainless Steels