Instruments and Experimental Techniques
Издатель: Springer Nature · 19 статей
-
Verification of a Steam–Gas Mixture Analytical Model at Increased Pressures
Abstract The steam–gas mixture density at increased pressures is calculated. Based on the experimental data available in the literature, the compressibility factors of H 2 , He, N 2 , and O 2 gases, and deviations of steam–gas mixture...
-
Modeling and Thermal Performance Analysis of a Flexible Peak Shaving System for Thermal Power Units Coupled with Molten Salt Energy Storage
Abstract— To improve the capacity for peak shaving and the renewable energy consumption of the power grid, mining the peak shaving potential of coal-fired units and enhancing unit flexibility are the future development trends for...
-
Studying the Thermal Characteristics of a Copper Loop Heat Pipe with a Flat Evaporator
Abstract— The article presents the results of experiments aimed at studying the thermal characteristics of a copper loop heat pipe (LHP) with a newly designed flat evaporator and a U-shaped tubular condenser. Water and methanol were...
-
The Influence of Quantitative and Qualitative Composition of Deposits on the Damageability of High Pressure Boiler Waterwall Tubes
Abstract The operational effectiveness and safety of high-pressure boilers depend on the condition of their heat transfer surfaces. The formation of multilayer deposits on the inner surfaces of waterwall tubes gives rise to problems,...
-
Results of Elaborating the Demo Model of a Small Turboshaft Gas Turbine Engine and a Power Unit on Its Basis
Abstract The article presents the results of elaborating a compact small gas turbine power unit relating to the 180 kW capacity class intended for a wide use in various industry branches. The design solutions for and technical...
-
Chemical Blending as a Version for Improving Scale Inhibitors
Abstract Scaling of slightly soluble compounds is a key problem of water treatment in heat supply and circulation cooling water systems, as well as in the use of membrane technologies. The problem of minimizing the risks of slightly...
-
Studying a Submerged Liquid Metal Jet in Longitudinal Magnetic Field Using Hybrid LES Modeling and Experimental Methods
Abstract— The article presents the results of numerically simulating a submerged jet flow of liquid metal (mercury) in a round tube under the effect of longitudinal magnetic field. The submerged jet is produced when liquid metal flows...
-
Exergy Analysis of Parabolic Trough Collector
Abstract— This work presents an exergetic analysis of the commercial parabolic trough collector (PTC) used for the water desalination that has a dimensions similar to Solar Electric Generating System parabolic trough collector Model...
-
Effective Thermal Conductivity of a Heat Pipe with Forced Working Fluid Pulsations
Abstract— The effective thermal conductivity of a pulsating heat pipe (also referred to as a dream pipe) is studied. In heat pipes of this type, longitudinal heat transfer is enhanced owing to forced working fluid pulsations. The...
-
Research on Thermal Conductivity of Graphene-Paraffin Composite Phase Change Materials
Abstract In this study, the thermal conductivity of paraffin matrix was improved by adding functional graphene. Composite phase change materials (PCMs) based on paraffin and acid-treated graphene were prepared and tested at various...
-
Condition Monitoring and Diagnosis of a Drum Boiler Using Algorithms of the Paraconsistent Annotated Logic: Condition Monitoring Model of Drum Steam
Abstract In this work, a condition monitoring model of drum steam using Paraconsistent Annotated Logic (PAL) was investigated to provide the mathematical and logical foundation for the application of PAL to monitor condition of steam in...
-
Mathematical Simulation of Compressor Flow Path Inlet Compartments Icing under Adverse Weather Conditions
Abstract— Ice accretion on the components of on-land power equipment and aircraft equipment under harsh weather conditions adversely affects their operation. Icing may emerge both near the ground surface and at significant altitudes....
-
Genesis, Morphology, and Composition of Corrosion Product Dissipative Forms in the Primary Coolant of a PWR Type Nuclear Reactor
Abstract— The article considers regularities relating to the behavior of dissipative corrosion product (CP) impurities (solid phase particles) existing in the primary circuit of a test bench serving as a prototype of a nuclear...
-
Neural Network Simulation of Burner Operation Parameters
Abstract— The article presents the results of studying the applicability of deep learning methods for predicting the operation parameters of a liquid fuel fired burner with steam-assisted atomization and a gas generation chamber, which...
-
Influence of Profiling the Curving of the Tip Part of a Unshrouded Blade on its Aerodynamic Efficiency
Abstract The development of tip clearance control and monitoring systems in gas turbines has led to a trend toward eliminating shrouds on rotor blades in a number of high-power stationary gas turbines, such as the SGT5-4000F, SGT-8000H,...
-
Achieving More Efficient Energy Generation by Complexes on the Basis of Hydropower Resources with the Possibility of Energy Storage during Operation as Part of Autonomous Power Supply Systems
Abstract— The possibility of achieving more efficient electricity generation by energy complexes on the basis of hydropower resources with predominantly using them in autonomous power supply systems is analyzed. The choice of daily...
-
Development of a Thermal Oil Pentane Evaporator Design for an ORC Unit
Abstract— A vapor generator is among the most complex and thermally stressed component of the thermal cycle circuit of a power unit operating according to the organic Rankine cycle (ORC). As a rule, the ORC unit vapor generators...
-
New Technology for Oil-Free Startup and Flame Stabilization in the Boiler Furnace of TPP
Abstract— The work puts forth a gliding arc discharge plasma-based technology for solid fuel ignition and flame stabilization. This technology helps burn effectively, eco-friendly the low-rank fuel from the Democratic People’s Republic...
-
Experimental Determination of the Frequency Effect on the Dynamic Stiffness of Pipeline Compensators and Its Lowering Methods
Abstract— The article discusses methods for determining the dynamic stiffness dependence of liquid-filled pipeline compensators on the vibration frequency, also during the flow of liquid through the compensator and pipelines, on...