Nature Photonics
Издатель: Springer Nature · 20 статей
-
Exothermic Reaction Waves in Oxygen Excited by Microdoses of Oil
Abstract The excitation and propagation of exothermic reaction waves in a closed channel filled with gaseous oxygen at initial pressures of $$0.1{-} 2$$ MPa are studied. The waves are excited by a heated Nichrome spiral coated with a...
-
Kinetic Mechanism of Ignition and Combustion of C 3 H 8 / n C 4 H 10 / i C 4 H 10 Three-Component Surrogates for Liquefied Petroleum Gas-Based Alternative Fuels
Abstract We have developed a reaction mechanism for the ignition and combustion of C 3 H 8 / n C 4 H 10 / i C 4 H 10 three-component surrogates for liquefied petroleum gas-based alternative fuels. The mechanism describes the ignition of...
-
Testing the Hypothesis of a Universal Dependence of Burning Rate on Particle Size in Granulated Mixtures: The Cases of 5Ti + 3Si and Ti + C
Abstract In self-propagating high-temperature synthesis processes, one of the important problems is the predictability and reproducibility of the combustion regime. It is well known that different grades and even different batches of...
-
Experimental Study of Ignition of Electrode Carbon by Thermal Radiation
Abstract This paper presents the results of an experimental study of the ignition of electrode carbon samples heated by an integral flux of thermal radiation. The experiments were carried out using an Uran-1 radiant heating system in...
-
Identification of the Parameters of the Lee–Tarver Trinomial Ignition Growth Model Based on a Genetic Algorithm
Abstract In order to determine the parameters of the Lee–Tarver trinomial ignition growth model of explosives, a method for determining the parameters of the Lee–Tarver trinomial ignition growth model using genetic algorithm and the...
-
Numerical Simulation of Combustion of an Aluminized Solid Propellant under Pressure Oscillations
Abstract A coupled combustion model is used to study unsteady combustion of a metallized composite solid propellant with a harmonic pressure change above the propellant surface. The propellant combustion model includes chemical...
-
Electrical Resistance of Copper under Multiple Shock Compression and Generation of Crystal Structure Defects
Abstract The electrical resistance of copper foil under multiple shock compression to a pressure of 40 GPa is studied experimentally in several explosive systems: in a reflected shock wave, under compression in a rigid shell, and in a...
-
Effect of Mechanical Activation of Carbon Black on the Densification and Combustion Behavior of Ti + C Mixtures
Abstract We have studied the effect of preliminary mechanical activation (MA) of carbon black powder on the properties, densification, and combustion behavior of equiatomic Ti + C mixtures. MA has been shown to cause breakdown of the...
-
Gaseous Detonation of Acetylene–Oxygen Mixtures Diluted with Argon or Helium and Their Application in Detonation Spraying
Abstract The detonation of acetylene–oxygen mixtures diluted with helium or argon is studied in an extended channel with a flow-through supply of explosive mixture components at atmospheric pressure. The steady detonation velocity and...
-
Detonation Combustion of Carbon-Free Ammonia/Hydrogen–Air Mixtures
Abstract Continuous spin and multifront detonations of carbon-free ammonia/hydrogen–air mixtures are obtained for the first time in an annular cylindrical combustion chamber with a diameter of 503 mm. Binary ammonia/hydrogen fuel with a...
-
Ammonia–Oxygen–Nitrogen System as a Carbon-Free Flammable Mixture
Abstract This paper presents the most important gas-dynamic and kinetic parameters of combustion, explosion, and detonation for ammonia/oxygen combustible systems. Stoichiometric, lean, and rich compositions are considered with the...
-
Detonation Initiation by Shock Interaction with a Combustible Gas Cylinder near a Solid Wall
Abstract The interaction of a shock wave with a near-wall gas bubble (transverse cylinder) filled with a hydrogen–oxygen mixture with added xenon is numerically investigated in a two-dimensional plane formulation using the Euler...
-
Influence of Component Ratio, Mechanical Activation, and Preclamping of Samples on Combustion in the (5Ti + 3Si) + (Ti + 2B) System
Abstract This paper examines the influence of component ratio, mechanical activation, and preclamping of samples on the combustion speed and elongation of unclamped samples during synthesis and the phase composition and morphology of...
-
Ignition and Propagation of Combustion Waves in a Two-Dimensional Channel. Part I
Abstract Despite numerous studies, many aspects of ignition and propagation of combustion and detonation waves in combustible mixtures remain insufficiently studied, which complicates the scientifically-based control of these processes....
-
Detonation Products of Composite Explosives Based on Benzotrifuroxan
Abstract A microscopic and diffraction study of detonation carbon in explosive compositions of benzotrifuroxan with RDX, octadecanoic acid, and TNT has been performed. It has been found that the detonation products of compositions...
-
Investigation into Effect of Adding Coal Suspension on Combustion Stability and Methane Lower Flammability Limit in Methane–Air Mixtures
Abstract This paper presents a study on the possibility of combustion waves in $$\alpha {\text{C}}{{{\text{H}}}_{{\text{4}}}}$$/air gas mixtures and heterogeneous dual-fuel mixtures (HDMs) $$\alpha...
-
Study of Phase Formation during Oxidation of Amorphous Boron and Boron Modified with Vanadium Pentoxide Using a Synchrotron Radiation Source
Abstract The oxidation of boron and boron powders modified with vanadium pentoxide gels at a heating rate of 10°C/min in air was studied by X-ray powder diffraction analysis using a synchrotron radiation source. It has been established...
-
Enhancement of Ignition and Combustion of Coal–Water Slurry Fuels
Abstract This paper presents an experimental study of the ignition and combustion of coal–water slurry fuel (CWSF) droplets in a high-temperature oxidizing environment at $$700{-} 900$$°C. The effect of adding waste motor oil as a...
-
Features of Combustion Wave Propagation through an Air Gap in a Ti–Si System
Abstract The regularities governing the transition of a gasless combustion wave across an air gap separating two cylindrical samples of different diameters, prepared from a Ti–Si mixture, are studied. Critical conditions for this...
-
Numerical and Experimental Investigation of FLSC-Based Debris-Free Stage Separation for Aerospace Applications
Abstract Stage separation is a critical event in multi-stage aerospace vehicles, demanding precise, reliable, and debris-free performance. Flexible linear shaped charges (FLSC) have emerged as an effective solution due to their high...