Science China Physics, Mechanics & Astronomy
Издатель: Springer Nature · 20 статей
-
Evaluation of the Influence of the Material of the Abrasive Tool Bundle on the Quality and Productivity of the Grinding Process of Austenitic Stainless Steel
Abstract The aim of this work is an experimental study of the effect of the abrasive tool bond material (bakelite, ceramic and vulcanite) on the quality (roughness and burns) and productivity (specific productivity, cutting forces,...
-
Study of Wear Resistance of Joint Bearings Made of Glass-Epoxy Composite Material
Abstract The aim of the work is to evaluate the influence of various antifriction additives on the tribological characteristics of spherical plain bearings made of glass-epoxy composite material under conditions close to operational...
-
Tribochemical Adaptation of Additively Grown Alloy “Stainless Steel—Copper” under Unlubricated Sliding Conditions with Passing Electric Current
Abstract Multicomponent stainless steel and copper (SS/Cu) alloys were produced using dual wire-feed electron beam additive manufacturing added with 50 vol % stainless steel. Tribotechnical pin-on-disk tests under conditions of dry...
-
Tribological Properties of Ni–B and Ni–P Coatings under Friction in a Biodegradable Oil Environment
Abstract The structure, phase composition and tribotechnical properties of Ni–2.8B and Ni–8.8P coatings were studied during friction in a biodegradable lubricant based on rapeseed oil. It is shown that in the initial state, the...
-
Investigation of Sliding Friction of L63 Brass with Different Structural States
Abstract The objective of this study is to investigate the effect of heat treatment on the tribological properties of L63 brass with a structure formed after equal-channel angular pressing (ECAP). The object of this study is L63 brass...
-
Identification of Surface Damages of Rolling Bodies of Ball Bearings Using Vibration Diagnostics under Contact Fatigue Testing
Abstract One of the main tasks that are solved in the process of developing specialized contact fatigue test rigs is the choice of a reliable method for identifying damage on the specimen surface. The paper presents the results of...
-
Influence of Size and Geometry of Abrasive Grains on the Efficiency of the Grinding Process
Abstract Currently, metalworking enterprises are growing requirements for the quality of products, as well as for increasing the productivity of finishing operations. To a large extent, the final result is influenced by the quality of...
-
Method for Calculating Oil Film Thickness between the Teeth of Enclosed Cylindrical Gear Transmissions
Abstract — The work has been aimed at revealing the patterns of changes in the oil film thickness within cylindrical gear transmissions depending on the oil dynamic viscosity, on the total rolling velocity, on the sliding velocity of...
-
The Frictional Properties of Diamond-Like Carbon Films Deposited on a 45 Steel Substrate
Abstract The aim of this work is to synthesize diamond-like carbon (DLC) films using physical vapor deposition (PVD), determine their sp 2 / sp 3 phase composition, and investigate the tribological properties of a multilayer system...
-
Effect of Additives on the Tribological Characteristics of Lubrication Greases (a Review)
Abstract The present work is devoted to an overview of studies on the effect of fine solid particles exerted on the tribotechnical properties of lubrication lubrication greases. Some antifriction and antiwear properties such as friction...
-
Hydroabrasive Wear of Polyurethane Elastomers as a Function of Hardness
Abstract This paper presents the results of a study examining the relationship between hydroabrasive wear of a series of polyurethane elastomers and their physical and mechanical properties. A series of polyetherurethane urea elastomers...
-
Study of Dynamic Adaptation of a Copper Alloy Structure to Friction Conditions in a Nanomodified Lubricant Environment
Abstract Friction pairs consisting of LAS53 brass and 45 steel were studied in a lubricant composition based on I-20A industrial oil with additives containing a suspension of nanosized serpentine particles and soft metal fatty acid...
-
Simulation of the Formation of a Back-End Defect at the Final Stage of Extrusion Taking the Laws of Friction into Account
Abstract The purpose of the work is to simulate the process of forming a back-end defect at the final stage of direct extrusion of a 6061 aluminum alloy bar, taking into account the influence of the law of friction on the surface of the...
-
Study of Physicochemical Processes in the Friction Interface of Polymeric Materials
Abstract The present study investigates the physicochemical processes occurring in the surface layers of aliphatic polyamides under friction conditions. Using mass spectrometric analysis of thermal and tribodestruction products, the...
-
Relationship between Thermophysical and Tribological Characteristics of Asbestos-Free and Copper-Free Friction Composite and Its Comparison with Copper-Containing Counterparts
Abstract Comparative studies of the thermophysical and tribological characteristics of a newly developed copper-free NAO composite (RFM) utilizing basalt fiber from Armenian deposits and three commercial copper-containing materials were...
-
Piston Ring Lubrication Modeling: An Overview
Abstract This article is devoted to the analysis of modern methods of mathematical modeling of the lubrication process of piston rings of internal combustion engines. Mathematical formulations of those processes used in conjunction with...
-
Wear of St3 Steel and Oxygen Distribution on Its Contact Surface during Unlubricated Sliding against 45 Steel under Electric Current
Abstract The aim of this study was to establish the relationship between the tribotechnical characteristics of St3 steel and the structural state of its contact layers during unlubricated sliding against hardened 45 steel under an...
-
Assessing the Influence of Microstructure Parameters on the Wear Resistance of Elastomer Composites
Abstract To evaluate the influence of the microstructural parameters of elastomeric composites on the wear resistance of this class of materials, elastomeric composite samples with varying degrees of filling and carbon black particles...
-
Effect of Orthotropic Friction Law on Rigid Body Sliding over a Plane under an Axisymmetric Distribution of Contact Pressure
Abstract A mechanical-and-mathematical model for the motion of a rigid body over a plane under the conditions of associated orthotropic friction, under the assumption of the fact that an the contact pressure is axisymmetrically...
-
Fretting Wear and Peel Load of TiN and TiZrN Coatings
Abstract The influence of the structure, physicomechanical properties, and annealing of TiN and TiZrN coatings on their resistance to fretting wear and spalling was investigated. It was established that low-temperature annealing of TiN...