Advanced Engineering Materials
Publisher: Wiley · ISSN 14381656 · 46 articles
- Effects of Mg on Microstructure and Solidification of a Hypereutectic Zn–8 wt.%Al Alloy
- Mo‐Based Multiphase Interface Design for PcBN Composites: Enhanced Interfacial Bonding, Mechanical, and Cutting Performances
- Volcano‐Type Etch Rate Modulation by Magnetic Layer in Magnetic Metal‐Assisted Chemical Etching
- Effect of Ti3SiC2 and SiC on Mechanical and Tribological Properties of Copper Matrix Composites With Different Content
- Flexural Behavior of 3D‐Printed Porous Bouligand‐Structured Polymers: Influence of Pitch Angle and Porosity
-
Microstructure and Properties of Cr–M(Nb,V) Composite Carbide Layers on GCr15 Steel Prepared by Pack Cementation
In this study, dense Cr–Nb and Cr–V binary composite carbide layers were successfully fabricated on GCr15 steel via the powder pack cementation technique, and the microstructure, mechanical properties, and dry sliding wear behaviors of...
-
Influence of La and Nb Modification on the Structural, Optical, and Ferroelectric Properties of BiFeO3‐ and BaTiO3‐Based Ceramics
BaTiO 3 (BT), Bi 0.9 La 0.1 Fe 0.5 Nb 0.5 O 3 (BLNF), and 0.6BiFeO 3 –0.4BaTi 0.5 Nb 0.5 O 3 (BTN–BF) ceramics were synthesized by the conventional solid‐state reaction method to investigate composition–structure–property relationships...
-
Thermal Diffusivity in Metallic Nanowire Aerogels
Metallic nanowire aerogels are a class of low‐density metamaterials that combine the properties of metals with the high porosity of aerogels. In the current work, Ag and Cu nanowire aerogels with densities between 20 and 810 mg/cm 3...
-
Correlations Between Mechanical Properties and Dielectric Responses of CrNx Coatings Deposited via Modulated Pulsed Power Magnetron Sputtering
CrN x coatings deposited by modulated pulsed power magnetron sputtering (MPPMS) show the potential to be an epsilon‐near‐zero (ENZ) material in a large bandwidth ultraviolet region, and dielectric permittivity and mechanical parameters...
- Interpretable Strain‐Compensated Arrhenius Modeling and γ′‐controlled Recrystallization of GH4065A Superalloy During Hot Deformation
- Mechanical Properties and Collaborative Design of Triply Periodic Minimal Surface Structures with Variable Density and Variable Direction
- Effect of Laser Power Variation on Properties of In718/Ni60AA/Ni‐Graphite Composite Cladding Coatings
- Microstructure Evolution and Strengthening–Toughening Mechanism of TC4 Titanium Alloy With Minor Nb and Ni Additions During Posthot‐Rolling Heat Treatment
- Effect of Mechanical Frequency on the Tribocorrosive Performance of AZ91D Magnesium Alloy in Ringer's Solution
- Development of a Cold Wall Reactor System for the Low‐Pressure Chemical Vapor Deposition of BN on SiC Fiber Tow
- Ta–V Nanoscale Multilayered Hydrogen Diffusion Layers for High‑Power Boron Neutron Capture Therapy Neutron Targets: Microstructure, Hydrogen Embrittlement Resistance, and Irradiation Performance
- Microstructure and Reciprocating Wear Behavior of 6061Al Matrix Composites Reinforced With AlCoCrFeNi2.1 High Entropy Alloy Particles
- Hierarchical 3D Bilayer Magnetic Foam/MXene Film Composites for High‐Performance Absorption‐Driven Electromagnetic Interference Shielding
- Self‐Healing Hybrid Composites Based on a Polyurethane Polymeric Matrix With Cerium Oxide and Zinc Oxide Nanoparticles
- Cold‐Casting Based Process Development of NiTiHf High Temperature Shape Memory Alloys for Binder Jet Additive Manufacturing
- Damping and Mechanical Properties of THUV‐328/DZ/TPU Composites: A Molecular Dynamics Study
- Topology Optimization Design of TPMS Structures Based on Element Principal Stress Directions
- Enhanced Properties of Copper Matrix Composites Reinforced With In Situ Prepared Cr‐Doped Graphene
- Adjusting Nucleation Chemistry for the Atomic Layer Deposition of Antimony Selenide on Metal Oxide Surfaces
- Crashworthiness Performance and Multicriteria Decision‐Making of Lightweight Origami‐Inspired 3D‐Printed PLA+ Tubes
- Edible Cuttlefish Ink: Complex Chemistry, Structure, and Electrical Response
- Interfacial Microstructure and Properties of Antifriction Copper/Steel Cladding Composites Fabricated by Vacuum Diffusion Bonding
- Nickel–Chromium Alloy Coatings Through Electrodeposition: Structural and Corrosion Properties
- Strength and Toughness Mechanisms of Layered Ti3AlC2 Reinforced TiAl3‐Based Composites
- Microstructure Evolution and Mechanical Properties of 7050 Aluminum Alloy During Two‐Stage Heat Treatment