Journal of the Indian Academy of Wood Science
Издатель: Springer Nature · ISSN 0972-172X,0976-8432 · 25 статей
-
Improvement of structural performances of paulownia laminate veneer lumber (LVL) beams by CFRP and GFRP sheets
Laminated veneer lumber exhibits limited tensile resistance in the tension zone under bending loads; therefore, reinforcing this region is essential. This study investigated the bending performance of Paulownia laminated veneer lumber...
-
Structural and mechanical performance of natural date palm-reinforced epoxy composites for joint applications
Natural fillers are promising, abundant, and inexpensive for adhesively bonded joints, which are now widely used due to their unique advantages, including uniform stress distribution, reduced stress concentration, and enhanced strength....
-
Radio-frequency vacuum drying of Mangifera indica wood: insights into drying kinetics, microstructural changes and physico-mechanical properties
The present study evaluated the drying performance of Mangifera indica (mango) wood using Radio-Frequency Vacuum (RFV) technology, with emphasis on drying kinetics, moisture distribution, microstructural changes, and physico-mechanical...
-
Waste to value: development of hybrid particle board using bamboo and recycled plastic
This study developed hybrid bio-boards from organic and plastic wastes as sustainable, value-added alternatives to conventional wood particleboard widely used in domestic interior applications while also offering thermal and acoustic...
-
Near infrared spectroscopy in tree improvement and wood quality characterization: a review
The global demand for timber is increasing, making it crucial to boost productivity and improve wood quality through focused tree breeding programs. Conventional evaluations of wood quality are destructive, lengthy, and not suitable for...
-
Performance evaluation of MDF boards made from Populus deltoides using UF resin and radio frequency curing
This study investigates the application of radio frequency (RF) hot pressing for the production of medium-density fiber-boards (MDF) utilizing lops and tops of Populus deltoides and urea-formaldehyde (UF) adhesive. MDF boards were...
-
Carbon sequestration by harvested wood products by direct inventory method: a case study
Harvested wood products (HWPs) constitute a significant and dynamic carbon pool within the global carbon cycle, functioning alongside major reservoirs such as soils and oceans. Unlike many conventional construction materials, HWPs...
-
Microwave drying of Wrightia tinctoria and its impact on physicomechanical properties and microstructures
Wrightia tinctoria is an important raw material for India’s toy and handicraft clusters, with an entire cluster (Channapatna Toys and Handicraft cluster, Karnataka) relying almost exclusively on this species. Traditional air seasoning...
-
Enhancing cement-wood compatibility through hot-water extractives removal from logging waste of two Amazonian timber species
The compatibility between wood and cement is a challenge in producing composites from lignocellulosic residues. This study investigated the influence of extractives from two Amazonian wood species, Dinizia excelsa and Dipteryx odorata ,...
-
Hybrid vinyl ester composites reinforced with Macrotyloma uniflorum fibre and biocarbon: mechanical, thermal and wear performance
This study presents a sustainable hybrid vinyl ester composite reinforced with silane-treated Macrotyloma uniflorum stem microfibre and silane-treated biocarbon, designed to achieve simultaneous enhancement in mechanical, thermal, and...
-
Evaluating effect of thermal treatment on chemical composition and colour of Albizia lebbeck (L. Benth.)
Thermal modification is an eco-friendly technique to enhance performance of wood by altering its chemical properties. In this study, the effect of thermal treatment on the chemical composition of Albizia lebbeck , an important...
-
Morphological and mechanical characterization of Pinus radiata wood treated with two organic phase change materials via vacuum impregnation
The present study examines the mechanical and morphological properties of Pinus radiata D. Don wood impregnated with two different organic phase change materials (PCM). Specifically, a paraffin-type aliphatic PCM and a fatty acid PCM...
-
Structural performance of cross-laminated timber panels made from Gmelina arborea timber species: in-plane and out-of-plane compression
Cross-laminated timber (CLT) is gaining recognition as a sustainable alternative to traditional building materials like steel and concrete, offering enhanced structural rigidity and dimensional stability. However, its performance...
-
Deep features from Pre-trained CNNs and a vision transformer for amazonian timber species recognition using classical machine learning and random image patches
Accurate identification of timber species is essential for biodiversity conservation, sustainable forest management, and timber supply chain control. This study evaluated four pre-trained convolutional neural networks—ResNet50, VGG16,...
-
Banana fiber reinforced starch-chitosan composites with rice husk ash filler for sustainable non-structural panels
This study details the fabrication and characterization of low-cost bio-based composite panels designed for sustainable construction and eco-friendly packaging. The non-structural boards utilize agricultural by-products, reinforcing a...
-
Valorization of rice husk-derived cellulose microfibers as sustainable reinforcement in fiber-cement composites through mechanical and microstructural analysis
Fiber-cement composites are used in lightweight construction due to their favorable balance of mechanical and physical properties. This study investigates the influence of rice husk-derived cellulose microfibers on the performance of...
-
Development of hydrophilic silane - polymer coatings for enhanced durability and biofilm resistance of wood in marine environments
Fibrous lignocellulosic substrates such as wood used in the marine environment, eg., wooden docks, are highly susceptible to biofilm formation, which can progress to fouling, resulting in material degradation and increased maintenance...
-
Energy characterization of sawwood generated from mechanical processing of wood in small-scale sawmills
The growing demand for renewable energy sources has stimulated interest in biomass as a sustainable alternative, particularly the use of residues from the wood-processing industry. This study evaluated the energy potential of sawdust...
-
Chemical and energetic properties of Calycophyllum spruceanum wood and charcoal from the Brazilian Amazon rainforest
The Calycophyllum spruceanum , known in Brazil, as “pau-mulato”, is a rapidly growing forest species native to the Amazon that produces dense wood used in floors, plywood, civil and naval construction and firewood, as it has high...
-
Himalayan plants natural fibres-based woven mat reinforced polymer composites: a thermo-mechanical and abrasive wear study
Natural fibers remain the preferred source for creating composite materials that produce lightweight and biodegradable products for both industrial and household applications. The goal of this research is to develop hybrid polymer...
-
Surface treatment and service temperature effects on the performance of hybrid polymer composites reinforced with aluminized glass, bamboo fiber, and bagasse carbon quantum dots
This research examines the influence of service temperature aging on the mechanical, fatigue, thermal and dielectric performance of a polyester based sustainable hybrid composite reinforced with aluminized glass fiber, bamboo fiber and...
-
Using Fraké (Terminalia superba) wood waste to manufacture epoxy matrix composites for sustainable development
This study focuses on the development of a composite made from Fraké ( Terminalia superba ) wood waste in the form of particles and an epoxy matrix for use in industry. The composites are manufactured with three particle sizes ([t0.35[;...
-
Valorization of clonal Eucalyptus wood via sawing and air drying: product yields and drying defects
Clonal Eucalyptus wood has been grown in the Maâmora forest area (North-West of Morocco) as a fiber source, particularly for pulpwood production. This study aims to evaluate the lumber yields, air–drying kinetics, and drying...
-
Comparative bench-scale evaluation of flame exposure behavior of plywood and MDF coated with fire-retardant paint
Wood-based panel boards are widely used in construction and interior applications for their low cost and favorable mechanical properties, yet their flammability remains a major safety concern. This study evaluates the effectiveness of...
-
Influence of temperature and pressing time on the properties of medium density fiberboards made from Pinus taeda L.
The study’s objective was to evaluate the pressing stage of medium-density fiberboards made of Pinus taeda , which has a thickness of 15 and 18 mm and is influenced by temperature and pressing time on the physical and mechanical...