Results from characterization of spinning solutions obtained using meta-aramid wastes from fabrication of special clothing and fully used special clothing are reported. Recycling technology for fibers including stages of fabric grinding, spinning solution preparation, wet spinning of fibers, and orientation drawing was proposed. Thermal drawing following spinning was found to increase in the strength of the resulting fibers by 1.8-2.5 times. The heat resistance of regenerated fibers decreased by almost 7% as compared to that of the starting fibers.
Preparation and Characterization of Spinning Solutions and Meta-Aramid Fibers Based on Secondary Resources. // Plant Foods for Human Nutrition. – 2026. – DOI: 10.1007/s10692-026-10665-3. – URL: https://link.springer.com/article/10.1007/s10692-026-10665-3
(2026). Preparation and Characterization of Spinning Solutions and Meta-Aramid Fibers Based on Secondary Resources. Plant Foods for Human Nutrition. https://doi.org/10.1007/s10692-026-10665-3
“Preparation and Characterization of Spinning Solutions and Meta-Aramid Fibers Based on Secondary Resources.” Plant Foods for Human Nutrition, 2026. doi:10.1007/s10692-026-10665-3.
@article{article36436,
title = {Preparation and Characterization of Spinning Solutions and Meta-Aramid Fibers Based on Secondary Resources},
journal = {Plant Foods for Human Nutrition},
year = {2026},
doi = {10.1007/s10692-026-10665-3},
url = {https://link.springer.com/article/10.1007/s10692-026-10665-3}
}
Volumetric filters with low hydraulic resistance were shown to be advisable for filtering viscoelastic ultra-high-molecular-weight polyethylene (UHMWPE) spinning solutions. Solution flow through them is not associated with a significant...
Modification of chitosan of various molecular masses by active (black 4CT) and acidic dyes (violet 43) to produce new colored biopolymer derivatives was studied. The synthesis conditions, including reagent concentrations, temperature,...
Curing of epoxide binder in the presence of oxidized PAN-TT modified by AGM-9 was shown to occur under milder conditions than for unfilled matrices. This was probably due to chemical interaction between organic functional groups of...
A model has been developed to predict the degree of impregnation of a fabric made of polypropylene fibers with a linear density of 0.66 tex and a bulk density of 85 kg/m 3 based on two technological variables, such as the polyurethane...
Results from development of a Polikon C cation-exchange membrane by polycondensation filling in situ based on novolac phenol-formaldehyde fibrous material are reported. The use of a fibrous matrix as a nanoreactor was shown to allow the...